SPRINT FRONT BRAKE BRACKETS

1058 Sprint Left Front Brake Bracket Kit, with bolts for use  with Sander single caliper (S566) and 11 " aluminum rotor (S515)  or steel rotor (S516). Fits Sander spindles S500 or S501.
1058-1 Top Sprint Left Front Brake Bracket Kit.
1058-2 Same as 1058 with 4" hole spacing top to bottom.  1059 Sprint Left Front Brake Bracket Kit, with bolts for use  with Sander single caliper (S566) and 11 " aluminum rotor (S515) or steel rotor (S516). Fits Sander superlite spindles S509.
1059-1 Top Sprint Left Front Brake Bracket Kit. 
1050 Sprint Front Brake Bracket Kit, with bolts for use with  dual caliper (S567 or S568) and 11 " steel rotor (S516). This kit  comes complete for both sides. 
1051 Sprint Front Brake Bracket Kit, with bolts for use with
dual caliper (S567 or S568) , 12" steel rotor (S555 or S555D)  and Sander hat 1055D with S517 mounting kit. This kit comes
complete for both sides.
1054 Sprint Front Brake Bracket Kit, with bolts for use with
dual caliper (S567 or S568), 12.18" vented rotor and Sander hat 1055 with S517 mounting kit. For one side only, order two kits for both sides.
1054-2 Sprint Dual Brake Bracket, Same as 1054 but for newtapered front spindle 4" hole spacing top to botton.
                                                                       

SPRINT FRONT BRAKE HATS FRONT ROTORS

1055 Sprint Front Brake Hat, to be used with 12.18" diameter vented rotor (S558). Use hat with mounting stands (S517) to bolt  to the back side of the front hub.

1055D Sprint Front Brake Hat, to be used with 12" diameter X 5/16" steel rotor. Use hat with mounting stands (S517) to bolt to the back side of the front hub.

S558 Vented Front Rotor, )2.18" diameter X .810" to fit Sander 1055 front brake hat. For complete setup order the S517 stands, 1055 brake hat and 1054 bracket. Can also use on rear splined axle using the Sander S418 or S419 splined hat.

S555D Drilled Steel Rotor, 12" diameter X 5/16" to fit Sander 1055D front brake hat. For complete setup order the S517 stands, 1055 brake hat and 1054 bracket. Can also use on rear splined axle with the Sander S418 or 1055D front brake hat

 

SIX PIN WHEEL SPACERS 

S415 Six Pin Wheel Spacer, aluminum wheel spacer .250" wide to fit front or rear six pin hubs.

 S415M Midget Six Pin Wheel Spacer, aluminum wheel spacer .250" wide to fit Midget front or rear six pin hubs.

Previous Page                                                                                                                                     Next Page

Page 10
Glen Sander Engineering, Inc. 3155 Kashiwa St. Torrance, CA 90505
Voice 310-534-1210  Fax 310-534-0181