TUBULAR TORSION BARS AND ELIMINATOR "X" TUBULAR BARS

    Our Tubular torsion bars save about 3 pounds per bar. In addition, they react more quickly than solid torsion bars because they don't have the center to slow their twisting motion. We made our tubular bars bigger in the center to allow for the hole and are stamped with the solid bar size. They will have the same rate as the solid bar, with a bigger center.

    The ultimate quick reaction torsion bars are now here, to fill the need for the ultimate in quick reaction and light weight, we introduce our Eliminator "X" torsion bars. Made of our own superior material and rifle drilled to save 3 pounds, these bars provide even quicker rebounds rates, since there is no center to slow the twisting motion. In actual competition, top drivers say our Eliminator "X" tubular bars react quickly, with the rebound being more controlled due to the stronger material. Therefore, the Eliminator "X" tubular bars are easier to control for the shocks. Eliminator "X" tubular torsion bars are NOT available in all sizes.
   

S144 Mini Sprint Tubular Torsion Bar, with 3/4" X 48 spline and 3/4" bushing diameter. We stock these in 23" long in sizes .675, .690 to. 775 by .010 and. 775. Our mini sprint tubular bars have a 3/8" diameter hole thru and bars over. 740 are bigger in the center, so one bushing must be removed before installing bar.

S145 7/8" Midget Tubular Torsion Bar, with 7/8" X 48 spline and 7/8" bushing diameter. We stock these bars in 22" long, 22 1.2" long, and 26" long in sizes .625 to .975 by .025. Our midget tubular torsion bars have a 1/2" diameter hole thru and bars over .850 are bigger in the center, so one bushing must be removed before installing bar.

S1541" Tubular Torsion Bar, with 1 " X 48 spline and 1" bushing diameter. We stock these bars in 26" long, 28" long and 30' long in sizes. 750 to 1.000 by .025. Our 1" spline tubular torsion bars have a 1/2" diameter hole thru to save weight.

S155 11/8" Tubular torsion Bar, with 1 1/8"X 48 Spline and 1 1/8" bushing diameter. We stock these bars in 29" long and 30" long in sizes .900 to 1.050, by .025,1065,1075 1.100 and 1.125. Our 11/8" tubular torsion bars have a 3/4" hole thru and bars over 1.065 are bigger in the center.

S166 Eliminator "X" Tubular Torsion Bar, with 1 1/8" X 48 spline and 1 1/8" bushing diameter. We stock these bars in 29" long and 30" long in sizes .900 to 1050 by .025,1.065,1.075, 1.100 and 1.125.