REAR CAM DRIVE KIT

2001 Rear Cam Drive Kit, includes everything needed to reliably drive your power steering, fuel pump or both, off the back of your camshaft. You must drill and tap the end of your cam and cut your motor plate.

2002 Rear Cam Drive Kit, for big block Chevy, same kit as our 2001 but with a cam seal for the big block Chevy.


KSE POWER STEERING PUMP


S215-1 KSE Power Steering Pump, new style KSE power steering pump with mounted relief.

REAR CAM DRIVE PARTS


S201 Accessory Rear Cam Drive Housing, this is the 2" deep housing used in our 2001 kit.

S202 Cam Drive, standard right hand threads, 9/16" X 18.
Body 1" long, 1 5/8" overall.

S202B Cam Drive, same as the S202 cam drive but with left hand threads.

S202L Cam Drive, long right hand threads, 9/16" X 18. Body 1 1/2" long, 2 1/8" overall.

S202LB Cam Drive, same as theS202L cam drive but with left hand threads.

S203 Cam Seal, includes plate and seal for small block Chevy.

S203R Cam Seal, same as the S203 but for Rodeck Block.

S203RB Cam Seal, for use with a roller bearing camshaft.

S203BB Cam Seal, for use with a big block Chevy.

S203S Cam Seal Only, does not include aluminum plate to fit block.

S204 Intermediate Shaft and Coupler, used in rear drive kit 2001 with 3/8" hex shaft.

S205 3/8" Intermediate Hex Shaft Only.

S206 3/8" Intermediate hex Coupler Only.

S207 1/4" X 20 Allen Bolt, 5/8" long used to bolt S201 housing to motor plate.

Previous Page                                                                                                                                     Next Page

Page 15
Glen Sander Engineering, Inc. 3155 Kashiwa St. Torrance, CA 90505
Voice
310-534-1210  Fax 310-534-0181