A drive line perfonns many critical functions and can be a lot more important part of your car's perfonnance than you think. Remember, with a close drive line you are doing more than just transferring the power from the engine to the rear end, you are also determining the positioning of the rear end.
With the tremendous power being generated today, a drive line must be super strong, accurate and light to perfonn properly. Just think of the load on the drive line when you see a sprint car do a wheelstand! The whole twisting motion of the rear, as well as the weight of the car, is being taken by the drive line. A Sander Engineering drive line is a totally designed, engineered and precision manufactured assembly. It is designed to position the rear accurately without bending, flexing or twisting.
These are the reasons why so many racers are switching to Sander Engineering drive lines. They are appreciating the fact that the same type of engineering and quality that go into Sander torsion bars is also evident in a Sander Engineering drive line.
3002A-40" or -41" Drive Line, complete drive line from motor plate to rear end face. Please specify length desired, from back of motor plate to center line of the rear axle.
3002A-1-40" or -41" Drive Line, complete with aluminum big ball and torque tube, includes everything from the motor plate to the rear end face. Specify length desired.
DRIVE LINE W/COUPLER BEARING
3006A Drive Line with Coupler Bearing, with the coupler support bearing, controls and supports drive shaft for longer life. Includes Aluminum ball and torque tube with everything from the motor plate to the rear end face.
3007 A Torque Tube, Drive Shaft and Coupler Bearing, Includes aluminum torque tube with drive shaft and coupler bearing. Does not include a ball housing.