3910 Midget Complete Drive Line, for Winters rearend, with 2.300" aluminum torque tube and aluminum ball. Drive shaft is tubular and is 16 X 10 spline to fit Winters rearend.
3011 Midget Complete Drive Line,
for Halibrand rearend with 2.300" aluminum torque tube and aluminum ball. Drive shaft is tubular and is 16 X 6 spline to fit rearend.
MIDGET BILLET BEARING CAGES
4070 Midget Billet Bearings Cages, bearings are 6211RS and come with 31 spline inserts (S477S) to slide on axle.
LUG STUDS AND NUTS
SlO9 Sprint Drive Pin, 5/8" diameter with 1/2"X 20 threads. Fits knock off typefront hubs and splined rear hubs.
SllO Drive Pin Lock Nut, 1/2"X 20 threads.
Slll Threaded Drive Stud, 5/8"X II thread on pin and 1/2"X20 thread on shank. Fits bolt on front hubs and uses SI131ug nut.
Slll T Titanium Threaded Drive Stud, same as the S I11 stud.
Sll3 Aluminum Lug Nut, 5/8"X II thread.
DEEP REAR AXLE HEX NUTS
S476L Deep Hex Nut, with 2 1/2" left hand threads for use on long spline rear axle in place of cone spacer and hex nut.
S476R Deep Hex Nut, with 2 1/2" right hand threads for use on long spline rear axle in place of cone spacer and hex nut.