S555D Drilled 12" X 5116" Steel Rotor, fits Sander splined brake hat (S418 or S419) to use on the right rear axle and also fits standard brake hats. Can also be used on the front with the Sander (1055D) front brake hat.

S559D Drilled Midget 10.25" X 5116" Steel Rotor, to be used on the front with Sander (1053) brake hat or with standard brake hats, drilled to save weight and improve brake response.

S559A Midget 10.25 X 318" Aluminum Rotor, same as S559 rotor above but aluminum to be used on the left front with (1053) brake hat.

BIRD CAGES CLEVIS

S620 Steel W-Link Clevis, with 518" shank and 318" hole for pin. Can be used with midget or sprint bird-bearing cages that have a 518" clevis hole.

S620-1 Steel W-Link Clevis, with 112" shank and 3/8" hole for pin. Can be used with Sander midget or sprint bird-bearing cages that have a 1/2" clevis hole.

S556 10.25" X .810" Midget Inboard Rotor, for midget inboard brake kits S495 and S496.

S556MW 10.25" X 1.150" Midget Wide Inboard Rotor, for midget inboard brake kits S497 and S498.

S557LW 12.18" X .810" Lightweight Inboard Rotor, for use in sprint inboard brake kit S552.

S558 12.18" X .810" Vented Rotor, to fit brake hats for use on the front of pavement sprint or champ dirt cars with Sander 1055 brake hats and 1054 brake brackets and S568.

S558M 10.25" X .810" Midget Vented Rotor, for midget front on pavement cars, must be used with Sander front brake hats 1053D. Also use Sander 1052D brake bracket and caliper S568. We are the only one with a front vented rotor for midgets.

BIRD CAGE MOUNTING BRACKETS

S481 Bird Cage Lower Mounting Bracket, for Sander cages.

S481B Bird Cage Mounting Bracket Bolt.

S482 Rear Arm to Bird Cage Bolt.

S483 Bird Cage Top Radius Rod Bolt.

S483B Bird Cage Top Radius Rod Spacer.