SPRINT STEERING ARMS
COMBINATION STEERING ARMS
FOR S500, S50l, S509 SPINDLES

S505 Aluminum Steering Arm, The ultimate in superlite weight. Fits S500 and S501 Spindles. Hooks tie rod to each spindle 

S506 Thbular Steel Drag Link Arm, Liteweight tube type. U se with 2-S505 arms for complete set-up.

S507 Aluminum Steering Arm, Fits S509 Liteweight Spindle. 

S508 Tubular Steel Drag Link Arm, Fits S509 Spindles.

S506C Aluminum Combination Arm, For the left front spindle. Drag link hole milled at 10 degree angle, to be used with I-S505 steering arm.
S506CR Aluminum Combination Arm, For the right front spindle on right side steering set-ups.
S506CS Aluminum Combination Arm, For the left front spindle with the drag link hole moved forward and out with two posi- tions.
S508C Aluminum Combination Arm, Fits S509 Spindles. S508CS Aluminum Offset Combination Arm, Drag link hole moved forward 1" from center line of axle.

SPRINT FRONT BRAKE ROTORS

8515 Aluminum 11" Front Rotor, with stands and bolts. Use with our front brake bracket kit (1058) and single caliper (S566). Rotor is drilled for cooling and weight savings.
S515B Aluminum 11" Front Rotor Only.

S516 Steel Drilled 11" Front Rotor, with stands and bolts. To replace aluminum rotor for longer life, also drilled for weight savings.
S516B Steel Drilled 11" Front Rotor Only.

FRONT ROTOR MOUNTING KITS

S517 Front Rotor Mounting Kit, 3 stands and bolts. Stands have 1/2"x 20 threads thru and 1/2"X 20 flat head bolts.

S517-2Mouuting Stand Only, for S517 kit.

8517-4 Mounting Bolt Only, l/2"X 20 flat head bolts.

S517-5 Brake Bracket to Spindle Bolt, 112" X 20 flat head 2"