SPRINT HEX NUTS
HUB PRESSURE PLATES

S409L 2 1\2" Hex Nut, with left hand threads to be used on the right side of a midget front hub and splined front hub or on the right rear of a sprint splined axle.

S409R 2 112" Hex Nut, with right hand threads to be used on the left side of a midget front hub and splined front hub or on the left rear of a sprint splined axle.

S410L 2 5\8" Hex Nut, with left hand threads to be used on the right side of a sprint front hub.

S410R 2 5/8" Hex Nut, with right hand threads to be used on the left side of a sprint front hub.

S479L 17/8" Midget Winters Hex Nut, 31 spline rear axle.

S479RB 2 1/4" Midget Winters Hex Nut, 36 spline rear axle.

S479R 1 7/8" Midget Winters Hex Nut, 31 spline rear axle.

S479RB 2 114" Midget Winters Hex Nnt, 36 spline rear axle.

S408 Sprint Pressure Plate, 6 pin hub type for front knock-off hubs or for rear sprint splined axle.

S408M Midget Pressure Plate, 6 pin hub type for midget front knock-off hubs.

S408M-1 Midget Winters 31 Spline Presure Plate, 6 pin hub type for Winters 31 spline rear axle.

S408M-2 Midget Winters 36 Spline Pressure Plate, 6 pin hub type for Winters 36 spline heavy duty rear axle.

KING PIN BUSHINGS
TORSION BAR BUSHINGS

S514 Ford and Sander King Pin Bushing, fits all Sander front spindles (S500, S50l and S509). Must be honed after installed in spindle.

S514M Midget King Pin Bushing, fits all Sander front spindles (S502 and S503) and P&S type spindles.

8148 Aluminum Torsion Bar Bushing, fits 1 1/2" tube with .120 wall.

S148B Bronze Torsion Bar Bushing, fits 1 1/2" tube with .120 wall.

S148P Plastic Torsion Bar Bushing, fits 1 1/2" tube with .120 wall.

8149 Aluminum Torsion Bar Bushing, fits 11/2" tube with .095 wall.

S149B Bronze Torsion Bar Bushing, fits 1 1/2" tube with .095 wall.

S149P Plastic Torsion Bar Bushing, fits 1 1/2" tube with .095 wall.

S148MA Midget Aluminum Torsion Bar Bushing, fits 
1 1/4" tube with .083 wall.

S149MA Midget Aluminum Torsion Bar Bushing, fits
1 1/4" tube with .095 wall.

S148M-l Midget 1" Plastic Torsion Bar Bushing, fits 1 3/8" tube with .095 wall.