MIDGET STEERING ARMS

S120 Midget Aluminum Tie Rod Arm, liteweight arnl made from 2024 billet aluminum plate, milled and radius. Hooks tie rod to each spindle.

S121 Midget Aluminum Steering Arm, can be used on the top or bottom of the left front spindle, Drag link hole drilled at 10 degree angle. To be used with two S120 tie rod arms.

8122 Midget Aluminum Combination Arm, for the left front spindle and used with one SI20 arm on the right front. Drag link hole drilled at 10 degree angle for better rod end angle.

S122RS Right Steer Combination Arm, for the right front.

MIDGET FRONT BRAKE BRACKETS

1052 Midget Front Brake Bracket, for use with the single cali- per (S566) and a 10.25" rotor left or right front.

1052CSL Midget Front Brake Bracket, for use wth flat alumi- num rotor and has flathead bolts for the left front spindle.

1052CSR Midget Front Brake Bracket, for right front spindle.

MIDGET FRONT BRAKE HATS

1053 Midget Front Brake Hat, billet aluminum to fit a 10.25" rotor (aluminum S559A or steel S559D). Order S518 mounting kit to bolt hat to the back of the front hub.

lO53D Midget Front Brake Hat, to fit vented rotor (SSS8M) to the front hubs. Order one SS18 mounting kit to bolt hat to the back of the front hub.

MIDGET FRONT BRAKE ROTORS

8515M Midget Aluminum Brake Rotor, 10.25" diameter includes mounting kit (8517).
8515MB Midget Aluminum Front Rotor Only.

S516M Midget Steel Brake Rotor, 10.25" diameter includes mounting kit (S517).
S516MB Midget Steel Front Rotor Only.

S559D Midget Steel Brake Rotor, use 1053 hat, drilled to save weight and improve brake response.

S558M Midget Front Brake Rotor, vented .810 rotor for use with the Sander 1053D brake hat.